1. Before lifting operation, the magnet manufacturer shall check the surface cleanliness of the workpiece to be lifted, and try to deal with it before lifting as much as possible, so as to find the embroidered skin and protruding thorns, and clean them before lifting the object. At the same time, pay attention to the same position of the center line bar of the electromagnet suction cup and the workpiece, and check whether the safety inclined block of the handle is positively determined, and then operate and lift it.
2. Pay attention to the shape of different workpieces, use a variety of different lifting methods sensitively. Good methods can reduce the loss of machinery and reduce the cost. When lifting the cylindrical workpiece, the magnet manufacturer should adhere to the connection angle between the b-groove and the workpiece as two straight lines, so the lifting force of the electromagnetic chuck is only 30% - 50% of the rated lifting force.
3. Pay attention to the change of the ambient temperature and the surrounding direction of the lifting, and the magnet manufacturer shall prevent overload and crowd passing through.
AISEN MAGNETS focused on development and manufacturing of Neodymium magnet, has more than 10 years manufacturing experience in producing various sizes, different shape and surface coating. Over 45 different grades of neodymium magnet (strong magnet) widely used in many industry.
